Malleable Iron 90 Degree Elbow Equal Fig.90
Fig.90 is an equal 90 degree malleable iron elbow with female threaded connections. It is designed for changing pipe direction at a right angle in threaded pipework.
Key Features
- Equal 90 degree female elbow design.
- Galvanized malleable iron construction with internal threads.
- Used for threaded piping layouts requiring a compact right-angle turn.
- Available in sizes from 1/8 in. to 6 in.
Standard Specifications
- Material: EN1562 or ISO5922.
- Design and dimensions: EN10242 or ISO49.
- Threads: EN10226 or ISO7-1.
- Tensile strength: 350 MPa.
- Elongation: 10%.
- Zinc coating: 70 um.
- Working pressure: 363 PSI.
- Available size range: 1/8 in. to 6 in.
- Surface treatment: hot-dip galvanized, electrogalvanization, black.
Dimensions and Packing
| Code | NPS | DN | A (mm) | Unit Weight Black (g) | Unit Weight Galv. (g) | Packing Carton (pcs/ctn) |
|---|---|---|---|---|---|---|
| JZGAL9001 | 1/8 in. | 6 | 18 | 30.38 | 31 | 600 |
| JZGAL9002 | 1/4 in. | 8 | 20 | 42.14 | 43 | 600 |
| JZGAL9003 | 3/8 in. | 10 | 24 | 60.76 | 62 | 500 |
| JZGAL9004 | 1/2 in. | 15 | 27 | 96.04 | 98 | 400 |
| JZGAL9005 | 3/4 in. | 20 | 32 | 139.16 | 142 | 210 |
| JZGAL9006 | 1 in. | 25 | 37 | 213.64 | 218 | 120 |
| JZGAL9007 | 1-1/4 in. | 32 | 44.5 | 340.06 | 347 | 64 |
| JZGAL9008 | 1-1/2 in. | 40 | 48.5 | 423.36 | 432 | 48 |
| JZGAL9009 | 2 in. | 50 | 57 | 674.24 | 688 | 32 |
| JZGAL9010 | 2-1/2 in. | 65 | 68.5 | 1068.2 | 1090 | 16 |
| JZGAL9011 | 3 in. | 80 | 77.5 | 1489.6 | 1520 | 10 |
| JZGAL9012 | 4 in. | 100 | 96.5 | 2700.88 | 2756 | 6 |
| JZGAL9013 | 6 in. | 150 | 129 | 6089.72 | 6214 | 2 |
Product Details
| Product Type | 90 degree equal elbow for threaded pipe direction changes |
|---|---|
| Material | Malleable iron |
| Connection | Threaded pipe fitting connection |
| Dimension Data | Size, thread, length and packing information are listed in the dimensions table above |
| Applications | Water, air, gas and general industrial pipe installations |
| Ordering Note | Confirm size, thread standard, finish and packing requirement when sending an inquiry |
