Ordering code
Specification
| Bore(mm) | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
| Acting type | Double acting | ||||||||||
| Single acting | / | ||||||||||
| Working medium | Air (To be filtered by 40μm filter element ) | ||||||||||
| Operating pressure | Double acting | 1.5~10 Bar | |||||||||
| Single acting | 2~10 Bar | / | |||||||||
| Proof pressure | 15 Bar | ||||||||||
| Temperature Range | -20~70℃ | ||||||||||
| Operating Speed Range | Double acting:30~500mm/s, Single acting:50~500mm/s | ||||||||||
| Cushion Type | Bumper | ||||||||||
| Port size | M5×0.8 | G1/8″ | G1/4″ | G3/8″ | |||||||
ACQ Dimension
| Type | Without magnet | With magnet | AB | B | D | E | EA | H | J | JA | K | KA | KB | P | Without magnet | With magnet | T | ||||||||
| Bore | A | AC | A | AC | PA | PB | PA | PB | |||||||||||||||||
| Stroke | St≤50 | St=55 | St≥60 | St≤50 | St=55 | St≥60 | |||||||||||||||||||
| 12 | 20.5 | – | – | 17 | – | – | 31.5 | 28 | 3.5 | 25 | 6 | M3x0.5 | 6 | 5 | 6 | 3.5 | M4x0.7 Thru.hole:φ3.4 | 11 | 15.5 | M5x0.8 | 7.5 | 5 | 9 | 7 | 22 |
| 16 | 22 | 22 | 22 | 18.5 | 18.5 | 18.5 | 34 | 30.5 | 3.5 | 29 | 8 | M4x0.7 | 8 | 6 | 6 | 3.5 | M4x0.7 Thru.hole:φ3.4 | 11 | 20 | M5x0.8 | 8 | 5.5 | 9.5 | 5.5 | 28 |
| 20 | 24 | – | 34 | 19.5 | – | 29.5 | 36 | 31.5 | 4.5 | 36 | 10 | M5x0.8 | 7 | 8 | 9 | 5.5 | M6x1.0 Thru.hole:φ5.2 | 17 | 25.5 | M5x0.8 | 9 | 5.5 | 9.5 | 5.5 | 36 |
| 25 | 27.5 | – | 37.5 | 22.5 | – | 32.5 | 37.5 | 32.5 | 5 | 40 | 12 | M6x 1.0 | 12 | 10 | 9 | 5.5 | M6x1.0 Thru.hole:φ5.2 | 17 | 28 | M5x0.8 | 11 | 5.5 | 11 | 5.5 | 40 |
| Bore | EA | H | J | JA | K | KA | KB | P | Without magnet | With magnet | |||
| PA | PB | PA | PB | ||||||||||
| 32 | St=5 | 13 | 14 | 9 | 5.5 | M6×1.0 Thru.hole:φ 5.2 | 17 | 34 | 1/8″ | 7.5 | 6.5 | 10.5 | 7.5 |
| St＞5 | 10.5 | 7.5 | |||||||||||
| 40 | 13 | 14 | 9 | 5.5 | M6×1.0 Thru.hole:φ 5.2 | 17 | 40 | 1/8″ | 11 | 8 | 11 | 8 | |
| 50 | St=5 | 15 | 17 | 10.5 | 6.5 | M8×1.25 Thru.hole:φ6.8 | 22 | 50 | 1/4″ | 9 | 9 | 10.5 | 10.5 |
| St＞5 | 10.5 | 10.5 | |||||||||||
| 63 | St=5 | 15 | 17 | 14 | 9 | M10×1.5 Thru.hole:φ8.5 | 28.5 | 60 | 1/4″ | 14 | 9.5 | 15 | 10.5 |
| St＞5 | 15 | 10.5 | |||||||||||
| 80 | 20 | 22 | 17 | 11 | M12x1.75 Thru.hole:φ10.3 | 35.5 | 77 | 3/8″ | 16 | 14 | 16 | 14 | |
| 100 | 26 | 27 | 17 | 11 | M12x1.75 Thru.hole:φ10.3 | 35.5 | 94 | 3/8″ | 20 | 17.5 | 20 | 17.5 | |
| Bore | A(Without magnet) | A(With magnet) | AC(Without magnet) | AC(With magnet) | AB | B | BA | D | E | ||
| St≤50 | St≥60 | St≤50 | St≥60 | ||||||||
| 32 | 30 | 40 | 40 | 23 | 33 | 33 | 7 | 45 | 49.5 | 16 | M8×1.25 |
| 40 | 36.5 | 46.5 | 46.5 | 29.5 | 39.5 | 39.5 | 7 | 53 | 57 | 16 | M8×1.25 |
| 50 | 38.5 | 48.5 | 48.5 | 30.5 | 40.5 | 40.5 | 8 | 64 | 71 | 20 | M10×1.5 |
| 63 | 44 | 54 | 54 | 36 | 46 | 46 | 8 | 77 | 84 | 20 | M10×1.5 |
| 80 | 53.5 | 63.5 | 63.5 | 43.5 | 53.5 | 53.5 | 10 | 98 | 104 | 25 | M16×2.0 |
| 100 | 65 | 75 | 75 | 53 | 63 | 63 | 12 | 117 | 123.5 | 32 | M20×2.5 |
