Ordering code
Specification
| Bore(mm) | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
| Acting type | Double acting | ||||||||||
| Single acting | / | ||||||||||
| Working medium | Air (To be filtered by 40μm filter element ) | ||||||||||
| Operating pressure | Double acting | 1.5~10 Bar | |||||||||
| Single acting | 2~10 Bar | / | |||||||||
| Proof pressure | 15 Bar | ||||||||||
| Temperature Range | -20~70℃ | ||||||||||
| Operating Speed Range | Double acting:30~500mm/s, Single acting:50~500mm/s | ||||||||||
| Cushion Type | Bumper | ||||||||||
| Port size | M5×0.8 | G1/8″ | G1/4″ | G3/8″ | |||||||
SDA Dimension
| Bore | A | AC | A | AC | AB | B | BA | D | DA | E | EA | H | J | JA | K | KA | KB | M | MA | P | PA | PB | T | ||
| Without magnet | With magnet | St=5 | St＞5 | St=5 | St＞5 | ||||||||||||||||||||
| 12 | 22 | 17 | 32 | 27 | 5 | 25 | / | 6 | 4 | M3X0.5 | 6 | 5 | 6.5 | 4.5 | M5X0.8Thru.hole:φ4.2 | 12 | 16.3 | 10.2 | 1 | M5X0.8 | 7.5 | 7.5 | 5 | 5 | 23 |
| 16 | 24 | 18.5 | 34 | 28.5 | 5.5 | 29 | / | 6 | 4 | M3X0.5 | 6 | 5 | 6.5 | 4.5 | M5X0.8Thru.hole:φ4.2 | 12 | 19.8 | 11 | 1.5 | M5X0.8 | 8 | 8 | 5 | 5.5 | 28 |
| 20 | 25 | 19.5 | 35 | 29.5 | 5.5 | 34 | 36 | 8 | 4 | M4X0.7 | 8 | 6 | 6.5 | 4.5 | M5X0.8Thru.hole:φ4.2 | 14 | 24 | 13 | 1.5 | M5X0.8 | 8 | 9 | 5 | 5.5 | / |
| 25 | 27 | 21 | 37 | 31 | 6 | 40 | 42 | 10 | 4 | M5X0.8 | 10 | 8 | 8.2 | 5.5 | M6X1.0Thru.hole:φ5.2 | 15 | 28 | 17 | 2 | M5X0.8 | 9 | 9 | 5.5 | 5.5 | / |
| 32 | 31.5 | 24.5 | 41.5 | 34.5 | 7 | 44 | 50 | 12 | 4.5 | M6X1.0 | 12 | 10 | 8.2 | 5.5 | M6X1.0Thru.hole:φ5.2 | 16 | 34 | 22 | 2.5 | 1/8″ | 9 | 9 | 6.5 | 9 | / |
| 40 | 33 | 26 | 43 | 36 | 7 | 52 | 58.5 | 16 | 4 | M8X1.25 | 12 | 14 | 10.5 | 6.5 | M8X1.25Thru.hole:φ6.7 | 20 | 40 | 28 | 3 | 1/8″ | 9.5 | 9.5 | 7.5 | 7.5 | / |
| 50 | 37 | 28 | 47 | 38 | 9 | 62 | 71.5 | 20 | 5 | M10X1.5 | 15 | 17 | 10.5 | 6.5 | M8X1.25Thru.hole:φ6.7 | 25 | 48 | 38 | 4 | 1/4″ | 8 | 10.5 | 8 | 10.5 | / |
| 63 | 41 | 32 | 51 | 42 | 9 | 75 | 84.5 | 20 | 5 | M10X1.5 | 15 | 17 | 10.5 | 6.5 | M8X1.25Thru.hole:φ6.7 | 25 | 60 | 40 | 4 | 1/4″ | 9.5 | 12 | 9.5 | 11 | / |
| 80 | 52 | 41 | 62 | 51 | 11 | 94 | 104 | 25 | 6 | M14X1.5 | 20 | 22 | 17 | 11 | M12X1.75Thru.hole:φ10.4 | 25 | 74 | 45 | 5 | 3/8″ | 11.5 | 14.5 | 11.5 | 14.5 | / |
| 100 | 63 | 51 | 73 | 61 | 12 | 114 | 124 | 32 | 7 | M18X1.5 | 20 | 27 | 19 | 13 | M14X2.0Thru.hole:φ12.4 | 30 | 90 | 55 | 5 | 3/8″ | 16 | 20.5 | 16 | 20.5 | / |
| Bore | AB | D | DA | E | EA | EB | F | FA | H | M | MA | |
| SDAD/SDAJ | Others | |||||||||||
| 12 | 17 | 6 | 16 | M5X0.8 | 10 | 12 | 8 | 4 | 5 | 10.2 | 1 | 1 |
| 16 | 17.5 | 6 | 16 | M5X0.8 | 10 | 12 | 8 | 4 | 5 | 11 | 1.5 | 1.5 |
| 20 | 20.5 | 8 | 19 | M6X1.0 | 13 | 15 | 10 | 5 | 6 | 13 | 1.5 | 1.5 |
| 25 | 23 | 10 | 21 | M8X1.25 | 15 | 17 | 12 | 6 | 8 | 17 | 2 | 2 |
| 32 | 25 | 12 | 22 | M10X1.25 | 15 | 18 | 17 | 6 | 10 | 22 | 3 | 2.5 |
| 40 | 35 | 16 | 32 | M14X1.5 | 25 | 27.5 | 19 | 8 | 14 | 28 | 3 | 3 |
| 50 | 36.5 | 20 | 32.5 | M18X1.5 | 25.5 | 27.5 | 27 | 11 | 17 | 38 | 4 | 4 |
| 63 | 37.5 | 20 | 33.5 | M18X1.5 | 26 | 28 | 27 | 11 | 17 | 40 | 4 | 4 |
| 80 | 44 | 25 | 39 | M22X1.5 | 30 | 33 | 32 | 13 | 22 | 45 | 5 | 5 |
| 100 | 50 | 32 | 45 | M26X1.5 | 35 | 38 | 36 | 13 | 27 | 55 | 5 | 5 |
